TRENDnet TEW-643PI - Manual (Page 8)

3
IDENTIFYING EXTERNAL COMPONENTS
LED
Link
The Link LED indicator lighted green when the 802.11n Wireless LAN Adapter is
connected to wireless network successfully.
ACT (Activity)
The ACT LED indicator blinking green when the 802.11n Wireless LAN Adapter
is transmitting or receiving data.
Check the installation
The LEDs of the Wireless LAN Adapter are clearly visible and the status of the
network link can be seen instantly:
TEW-641PC
1. Once the device is plugged to the station’s PCMCIA slot, the LED of the
Wireless LAN Adapter will light up indicating a normal status.
2. When the device plugged to the station’s PCMCIA slot and the driver was
installed, the ACT will start alternate blinking, it means that the device is starting
to scan the wireless devices near the Wireless LAN Adapter.
3. While the Wireless LAN Adapter linked up and transmitting data to the Access
Point or to other Wireless LAN station, the Link LED will lighted green.
TEW-643PI
1. Once the device is plugged to the station’s PCI slot, the LED of the Wireless
LAN Adapter will light up indicating a normal status.
2. When the device plugged to the station’s PCI slot and the driver was installed,
the ACT will start alternate blinking, it means that the device is starting to scan
the wireless devices near the Wireless LAN Adapter.
3. While the Wireless LAN Adapter linked up and transmitting data to the Access
Point or to other Wireless LAN station, the Link LED will lighted green.