Toshiba Lcd TV/DVD Combination 23HLV86 - Manual (Page 40)

40
Using the
TV/D
VD’
s Features
Adjusting the sound quality
You can change the sound quality of your TV/DVD by adjusting the
bass, treble, and balance.
To adjust the sound quality:
1. Press MENU, then press or until the AUDIO menu.
2. Press
▲ or ▼ to highlight the item you want to adjust.
3. Press or to adjust the level.
• makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
AU D I O
M T S
BA S S
T R E B L E
BA L A N C E
S TA B L E S O U N D
S U R R O U N D
H D M I
R E S E T S T E R E O
: S E L E C T : A D J U S T
2 5
2 5
0
O F F
O F F
H D M I
To listen to a second audio program (SAP):
1. Press MENU, then press or to display the AUDIO menu.
2. Press
▲ or ▼ to highlight MTS.
3. Press or to highlight SAP. The TV/DVD speakers will output the
second audio program instead of normal audio.
4. Press EXIT to return to normal viewing.
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is off,
the TV screen will display “MUTE” in the lower right-hand corner. To
restore the sound, press MUTE again.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature provides high-fidelity stereo
sound. MTS also can transmit a second audio program (SAP) contain-
ing a second language or other audio information.
Note: The MTS feature is only available in ANT input source.
When the TV/DVD receives a stereo or SAP broadcast, the
“STEREO” or “SAP” displays on-screen every time you turn the
TV/DVD on, change the channel, or press DISPLAY.
To listen to stereo sound:
1. Press MENU, then press or to display the AUDIO menu.
2. Press
▲ or ▼ to highlight MTS.
3. Press or to highlight STR (stereo).
Note:
• In general, you can leave your TV/DVD in stereo mode because
the TV/DVD automatically outputs the type of sound being
broadcast (stereo or mono).
• If the stereo sound is noisy, select MONO to reduce the noise.
4. Press EXIT to return to normal viewing.
AUDIO
MTS
BASS
TREBLE
BALANCE
STABLE SOUND
SURROUND
HDMI
RESET
STR /SAP/MONO
:SELECT :ADJUST
25
25
0
OFF
OFF
HDMI
Note:
A second audio program (SAP) can be heard
only on those TV stations that offer it.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program’s normal audio.
However, if you have SAP on, and the station
you are watching is not currently
broadcasting a second audio program, the
station’s normal audio will be output;
however, occasionally there is no sound at all
in SAP mode. If this happens, set the MTS
feature to STEREO mode.
Note:
Adjusting the sound quality (bass, treble and
balance) does not affect the sound that is
output from the headphone jack.
MUTE
EXIT
DISPLAY
MENU
5X60301A(E)P33-40 21/4/06, 12:13 PM 40