Toshiba V.90 - Manual (Page 69)

S-Registers
AT command set result codes
50
CONNECT 45333 EC* 109 Connection at 45333 bps (V.90
mode)
CONNECT 46666 EC* 110 Connection at 46666 bps (V.90
mode)
CONNECT 49333 EC* 111 Connection at 49333 bps (V.90
mode)
CONNECT 50666 EC* 112 Connection at 50666 bps (V.90
mode)
CONNECT 53333 EC* 113 Connection at 53333 bps (V.90
mode)
CONNECT 54666 EC* 114 Connection at 54666 bps (V.90
mode)
Command Set Result Codes Table (Continued)
Result Code Numeric Description
* EC appears only when the Extended Result Codes configuration option is enabled. EC is replaced
by one of the following symbols, depending upon the error control method used:
V.42bis - V.42 error control and V.42bis data compression
V.42 - V.42 error control only
MNP 5 - MNP class 4 error control and MNP class 5 data compression
MNP 4 - MNP class 4 error control only
NoEC - No error control protocol