Asus S2-P8H61E - Manual (Page 50)

3-4 Chapter 3: Motherboard info
3.4 Connectors
1. Intel® H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1/2)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s or 6Gb/s
hard disk and optical disk drives.
2. USB connectors (10-1 pin USB910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
• The USB module is purchased separately.
• Connect the USB header to the front I/O port with USB port cable and card reader
cable.
P8H61-
I
P8H61-I USB2.0 connectors
PIN 1
USB+5V
USB_P12-
USB_P12+
GND
NC USB+5V
USB_P11-
USB_P11+
GND
USB1112
PIN 1
USB+5V
USB_P10-
USB_P10+
GND
NC USB+5V
USB_P9-
USB_P9+
GND
USB910
You must install Windows ® XP Service Pack 3 or later version before using Serial ATA hard
disk drives.
GN
D
RSATA_TXP2 RSATA_TXN2
GN
D
RSATA_RXP2 RSATA_RXN2
GN
D
SATA1
SATA2
GN
D
RSATA_RXN1 RSATA_RXP1 GN
D
RSATA_TXN1 RSATA_TXP1 GN
D
P8H61-
I
P8H61-I SATA connectors