Toshiba SD-R5112 - Manual (Page 12)

5/29 SD-R5112 Rev.1.0
(9) Load/Eject (a) Electrical Load/Eject (Eject Button)
(b) Load/Eject by ATAPI command
(c) Emergency Eject
(10) Air Flow Not Required
(11) Acoustic Noise 40 dB (IEC 179 A weighted at 1 m)
(12) Power Supply +5 V , +12 V (details in Section 7)
3.2. Environmental Conditions
This drive should be used under the conditions listed below.
3.2.1.Temperature and Humidity
(1) Operating Temperature 5 °
C to 50 °
C *1
(2) Storage Temperature -10 °
C to 60 °
C
(3) Shipping Temperature -40 °
C to 65 °
C *2
(4) Operating Temperature Gradient 11 °
C /hour (max)
(5) Storage Temperature Gradient 20 °
C /hour (max)
(6) Shipping Temperature Gradient 20
°
C /hour (max) *2
(7) Operating Humidity 8 % to 80 % (Wet bulb Maximum Temperature 27 °
C)
(8) Storage Humidity 5 % to 95 % (Wet bulb Maximum Temperature 40 °
C)
(9) Shipping Humidity 5 % to 95 % *2 (Wet bulb Maximum Temperature 40 °
C)
(10) Condensation In all the above conditions there must be no condensation
*1: Excluding medium.
*2: Packed in Toshiba original shipping package.