Toshiba SD-260SV - Manual (Page 39)

41
Adv
anced pla
ybac
k
Press AUDIO during playback.
The current audio setting is
displayed.
Recorded audio format number
changes sequentially. (The
maximum number of possible audio
formats is 8)
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations.
57
Press AUDIO while the audio setting is
displayed on the TV screen.
Each time you press the AUDIO
button, the audio settings included
on the DVD video disc change.
To turn off the audio setting display, press the
AUDIO button.
Selecting a Language
You can select a preferred language and sound recording system from those
included on the DVD video disc.
Selecting a playback audio setting
1 2
Selecting sound channels of VIDEO CDs
Press AUDIO repeatedly during
playback to hear a different audio
channel (stereo, Left or Right).
Notes
• When you turn on the DVD video player or replace a disc,
player returns to the initial default setting
56
.
If you select a sound track which is not included on the disc,
the DVD video player plays a prior sound track programmed
on the disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.
e.g.
Output sound conversion table
• Signals of 96kHz from the
COAXIAL DIGITAL AUDIO OUT
jack are depressed to 48 kHz by
down sampling process when:
– “3D On” is selected. 38
– a copyright protected disc is
played.
• Quantization bit of signals of 20 bit
or higher which is output from the
COAXIAL DIGITAL AUDIO OUT
jack is 16 bit if they are in a
copyright protected disc.
AUDIO
50 55 Digital Output
Bitstream
Bitstream
Bitstream
Bitstream
Bitstream Bitstream
Bitstream