Toshiba SD-260SV - Manual (Page 16)

16
Connections
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see
41
.
Connecting to a TV
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
• Make the following setting.
On-screen display Select: Page
“PCM” or
“Bitstream”
“Digital Output”
Composite
* Component
“Video Output”
* Only for analog video out jack (yellow)
connection with progressive scan off.
55
54
50
50