Topcom BUTLER 2562 - Manual (Page 12)

12 BUTLER 2562
3.5 MAKING AN INTERNAL CALL
Only possible when more than one handsets are registered to the base!!
Normal numeration:
1.
Press INT for 2 sec.
2. Enter the number of the internal handset (1 to 5)
Prenumération:
1.
Enter the number of the internal handset (1 to 5)
2. Press INT for 2 sec.
3.6 HANDS FREE MODE
You can converse with your correspondent without picking up the handset.
To activate or deactivate the hands free mode, press the
key during a call.
To adjust the volume, refer to the chapter “ Personalisation “- adjusting speaker volume.
3.7 INTERNAL CALL TRANSFER
Only possible when more than one handset are registered to the base!!
When you want to transfer an external call to another handset:
1.
During a conversation press and hold the INT key for 2 s.
2. Select the number of the internal handset, the external caller is put on hold.
3. When the other handset picks up, press to hang up and transfer the call. If the internal correspondent does not
pick-up, press INT for 2 seconds again to reconnect to the external caller on line.
3.8 CONFERENCE CALL
Only possible when more than one handsets are registered to the base!!
You can converse simultaneously with an internal correspondent and an external correspondent.
When you are on line with an external correspondent:
1.
Press and hold the INT key for 2 s.
2. Enter the number of the internal handset that you want to call
3. When the internal correspondent picks- up, press and hold
4. If the internal correspondent does not answer, press INT again for 2 sec. to reconnect to the external correspondent
on-line.
HL_B2562_scan.book Page 12 Monday, December 29, 2003 12:15 PM