TROY Group EtherWind 802.11b - Manual (Page 22)

◗ No additional software is needed on the system.
◗ Can be used on any system that supports web browser capabilities.
◗ Simply type the IP address into your web browser address bar to connect
◗ Default password is
ACCESS
*Both the EtherWind and the PC must be configured with an IP address and your
browser must be configured to work across a LAN in order to use WebXAdmin.
EtherWind Console
◗ A command-line oriented console
◗ Contains features not available through WP-Admin, Xadmin32 or
WebXAdmin
◗ Default password is ACCESS.
◗ Can be accessed via:
• TELNET
• DEC
NCP
• DEC NCL
• ULTRIX ccr
• TROY XCD XConfig NetWare Utility
• Serial
port
• WebXAdmin
Note:
In all cases, when you are connected, hit RETURN or ENTER to get the "#"
prompt, enter password ACCESS (it will not echo) and type anything in
response to the "Enter Username>" prompt. When you get the "Local>" prompt,
you are ready to enter commands.
HP JetAdmin
◗ HP Windows-based utility (TROY EtherWinds work transparently with
JetAdmin).
◗ Can be downloaded from the HP web site (http://www.hp.com)
Note: The TROY EtherWind will not appear in the list of configured servers
unless TCP/IP or IPX is running on the computer.
HP Web JetAdmin
◗ An HP utility for Windows NT Advanced Server and Windows 2000
◗ Can be downloaded from the HP web site (http://www.hp.com).
Once it is installed, a web browser on any computer that has access to the
Windows NT/2000 server may be used to access the TROY EtherWind.
3-2