Tv operation – Toshiba SD-P4000 User Manual

Page 23

TV operation

Adjust the volume level by pressing VOL + or –.
The volume level will be indicated on the
screen by green bars. As the volume level
increases, so do the number of bars. If the
volume decreases, the number of green bars
also decreases.

Set the TV/CABLE selection to the appropriate
position.

Press direct channel selection (0–9) to select
the channel.

TV mode direct channel selection
When the TV/CABLE selection is in the TV
position, all channels can be instantly selected by
using two buttons. (for example, to select channel
2, press “0”, then “2”.
If you press only “2”,
channel selection will
be delayed for a few
seconds.) For
channels 10 and
above, press the 2
digits in order.

Note:
If a channel with no broadcast is selected, the sound will
auto matically be muted.

To turn on the TV/DVD, press POWER.
The Power indicator will light.

POWER

VOL +/–

0–9

- VHF/UHF channels

CABLE - Cable TV channels

CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9:

Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press
“002”.

10-12:

Press “0”, then the remaining 2 digits.
Example, to select channel 12, press
“012”.

13-99:

Press the 2 digits in order. Example, to
select channel 36, press “36”.

100-125: Press the 3 digits in order. Example, to

select channel 120, press “120”.

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.

CATV

VHF
2-13

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-1)

100-125

(100) (125)

(5A)

VHF
2-13
UHF

14-69

TV operation

VOLUME

CH 02

TV operation

Auto power off
If a station being viewed stops broadcasting, the TV will
automatically shut itself off after 15 minutes.

J5N00221C [E] (P14-25)

15/09/2004, 4:24 PM