Topfield TF 5100 PVR - Manual (Page 28)

22 Preference Settings
enjoy only one source or both of them in either stereo or mono.
Set the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See § 5.2.3 for detailed description.
3.2.6 Radio frequency output
If you have connected your television to the RF OUT socket,
you should configure the radio frequency output. The digital
receiver can make the analog television from the digital tele-
vision and output it through the RF OUT socket.
Set the RF Output option to the television standard that your
country supports referring to Table
3.1 .
Table 3.1: Television standards by country
Signal type Country
PAL G Australia, Austria, Cyprus, Czech Republic, Egypt, Estonia, Finland, Ger-
many, Greece, Iceland, Iran, Israel, Italy, Kuwait, Latvia, Libya, Lithuania,
Luxembourg, Netherlands, New Zealand, Norway, Portugal, Slovakia, Slove-
nia, Spain, Sweden, Switzerland, Syria, Yugoslavia
PAL I Hong Kong, Macao, Republic of Ireland, South Africa, United Kingdom
PAL K Czech Republic, Hungary, Poland
NTSC M Bahamas, Belgium, Bolivia, Chile, Ecuador, Fiji, Guam, Jamaica, Mexico,
Panama, Peru, United States, Venezuela
Set the RF Channel option to a channel number as you de-
sire. You have to tune your television to the channel set to this
option to watch television.
If you have connected your analog television antenna to the
RF IN
, you can watch analog broadcasts via the digital re-
ceiver.
3.3 Local time setting
You should set your local time for timer events.