TC Electronic G-Force - Manual (Page 13)

Notes regarding the signal flow:
Signal is always present at both the Analog and Digital outputs.
G-Force is limited to 44.1kHz sample rate at both Analog and Digital inputs.
The Input level of the G-Force automatically optimizes the signal to noise ratio via a small relay in the input
section. You will see a prompt on the display and may hear a small click when the input gain range is
changed.
Digital
input
Analog
input
Input
gain
Input
selector
Bypass Output
gain
Digital
output
Analog
output
(balanced)
THE SIGNAL FLOW
11