beautypg.com

How to start telnet – TRENDnet Cable Modem/xDSL TW100-W1CA User Manual

Page 20

background image

- 16 -

Figure 18: COM 1 Properties

8.

Power up the product.

How to start Telnet

1.

The instructions below are for using this unit at its default settings (i.e. DHCP enabled,
Local Port IP address: 192.168.1.254, Subnet: 255.255.255.0).

2.

Go to Start? Run.

Figure 19

3.

Type “telnet 192.168.1.254 333” and click on OK. If the local port’s IP address was set
to something other than the factory default (“192.168.1.254”), enter that IP address.

See also other documents in the category TRENDnet Hardware: