Thecus Technology N8800 - Manual (Page 59)

Module File Location of the module file.
Browse Click to browse the folder of your PC to locate the module files.
Install Click to install the listed module into your N8800
NOTE
Modules can potentially harm your system. Only
your vendor, or publishers you can trust.
install modules from
Reset to Factory Default Settings
From the System menu, choose the
Factory Default item and the Reset to
Factory Default screen appears. Press
Apply to reset the N8800 to factory default
settings. Press Cancel to go back to the
main menu.
WARNING
Resetting to factory defaults will not erase the data
disks, but WILL revert all the settings to the factor stored in the hard
y default values.
Upgrading System Firmware
From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
• The beeper only beeps if it is enabled in the System Notification
menu.
NOTE
• Check Thecus website for the latest firmware release and release
notes.
Do NOT turn off the system during the firmware upgrade process. This
will lead to a catastrophic result that may render the system inoperable.
WARNING
59