Thecus Technology N8800 - Manual (Page 25)

For information on how to set up the Printer Server, refer to Chapter 5:
Additional Feature Setup > Printer Server .
UPS Settings
The N8800 can also support various
uninterruptible power supply units,
providing extra data security and
accessibility in the case of a power failure.
From the Status menu, choose the UPS
item and the UPS Setting screen appears.
Make any changes you wish, and press
Apply to confirm changes. See the
following table for a detailed description of
each item.
UPS Settings
Item Description
UPS Monitoring
Enable or disable UPS monitoring.
Manufacturer Choose the UPS manufacturer and model number
from the dropdowns.
Battery Status Current status of the UPS battery
Power Current status of the power being supplied to the
UPS
Seconds between power failure and
first notification Delay between power failure and first notification
in seconds.
Seconds between subsequent power
failure notifications Delay between subsequent notifications in
seconds.
Shutdown the system when the
battery charge is less than Amount of UPS battery remaining before system
should auto-shutdown.
Apply Press Apply to save your changes.
For a list of supported UPS units, see
Appendix E: UPS Compatibility List .
Wake-Up On Lan (WOL)
The N8800 has the ability to be awoken
from sleep mode via WAN port.
From the Status menu, choose the
WOL item, and the Wake-up On Lan
Configuration screen appears. From
here, you can Enable or Disable.
Wake-up On Lan Configuration
Item Description
WOL Servic
Enable or Disable WOL service
Apply Click Apply to save changes.
25