Thermador DWHD43C - Manual (Page 16)

14
Care and Maintenance
(continued)
To Remove the Fine Filter:
Lift the Fine Filter from the dishwasher floor as
shown in Figure 22 and flush it clean by holding it
under running water.
Figure 22
Fine
Filter
To reinstall the filter system:
1. Return the Fine Filter to its installed position.
2. Place the Large Object Trap/Fine Filter
Assembly into its installed position in the
dishwasher floor.
3. Turn the ring handle clockwise 1/4 turn until
it is locked. The arrow on the ring handle
and the arrow on the Fine Filter should point
to each other, as shown by the circle in
Figure 23.
Figure 23
Clean the Exterior Door Panel
4. Gently pull the ring handle to ensure that the
assembly is locked into place.
To avoid possible dishwasher damage, do
not use harsh chemicals, abrasive
cleaners, scouring pads (metal or plastic),
or abrasive cloths/paper towels to clean
your dishwasher’s exterior door panel.
Your dishwasher’s exterior door panel can
be damaged by doing so.
Colored Doors
Use only a soft cloth that is lightly dampened with
soapy water.
Stainless Steel Doors
Use a soft cloth with a non-abrasive cleaner
(preferably a liquid spray) made for cleaning
stainless steel. For the best results, apply the
stainless steel cleaner to the cloth, then wipe the
surface.
Clean the Door Gasket
Regularly clean the door gasket with a damp cloth
to remove food particles and other debris.