Loading and unloading a cassette tape, Loading, Unloading – Toshiba SD-KV550SU User Manual
Page 29
29
Basic setup (VCR)
Loading and unloading a cassette tape
Use only video cassette tapes marked
.
Loading
Remove the erase prevention tab with a screwdriver.
Cover the hole with a piece of adhesive tape.
To record again
Screwdriver
Automatic tape eject
This DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning,
the cassette tape will be ejected automatically.
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Automatic power ON
When you insert a cassette tape, the DVD/VCR power will turn ON automatically.
2
Erase prevention tab
Adhesive tape
Remove the cassette tape.
Erase prevention tab
Unloading
To prevent accidental erasure
To prevent accidental erasure
Tape speed and maximum recording time
Video cassette tape
Tape Speed
SLP (Super Long Play)
T-160
T-120
T-90
T-60
T-30
2-2/3 hours
2 hours
1-1/2 hours
1 hour
30 minutes
8 hours
6 hours
4-1/2 hours
3 hours
1-1/2 hours
SP (Standard Play)
Playback (VCR)
EJECT
Playback (VCR)
or
Press EJECT on the front panel or on the remote.
1
2I30201B-En_p26-31
1/13/06, 2:48 PM
29