Toshiba SD-KV550SU - Manual (Page 28)

28
Basic setup (VCR)
Repeat the step 1 on page 27 . Then press SET +
or – to select the “ADD/DELETE” and press ENTER.
1
To ADD/DELETE channels
Press VCR MENU until the menu screen is
cleared. 3
To Add or Delete channels 2
CH SETUP
TV
ADD/DELETE
CABLE
+/Ð/ENTER/MENU
AUTO CH MEMORY
ADD CH 003
+/Р/0Р9/ENTER/MENU
1) Press Direct channel selection buttons (0–9)
or SET +/– to select a channel number you want
to add or delete.
2) To add channels
Press ENTER until “ADD” appears on the screen.
To delete channels
Press ENTER until “DELETE” appears on the
screen. The channel number will blink.
3) Repeat step 1 and 2 to add or delete other
channel.
Tuner setting (Continued)
Noise elimination
When you don't want to receive a weak signal broadcast, a Blue
back screen can be obtained by selecting the NO NOISE BACK-
GROUND to “ON”. When the unit is shipped from the factory,
the NO NOISE BACKGROUND is set to “ON”.
Repeat the steps 1~2 on page 26 and press SET
+ or – to select “NO NOISE BACKGROUND”.
1
Press ENTER to select “ON” or “OFF” position. 2
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
〈+/-/ENTER/MENU 〉
Press VCR MENU until the menu screen is
cleared. 3
0–9
ENTER
VCR MENU
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
〈+/-/ENTER/MENU 〉
SET +/–
2I30201B-En_p26-31 1/13/06, 2:48 PM 28