Topfield DV3 Digital Terrestrial Receiver Personal Video Recorder TF 6000 PVRt - Manual (Page 79)

10.2 Transferring the receiver data 71
To update firmware with this method, perform the following
steps:
1. Plug a RS232 cable into the RS-232 port on the digital
receiver and the other’s.
2. Turn both of them on.
3. Select the Installation > Transfer Firmware > Transfer
Firmware to Other IRD menu.
10.2 Transferring the receiver data
The digital receiver retains such data as follows:
• Service list
• Favorite list
• Preference settings
It is possible to transfer receiver data to the digital receiver
from another same digital receiver connecting them with a
RS232 cable.
To transfer receiver data, perform the following steps:
1. Plug a RS232 cable into the RS-232 port on the digital
receiver and the other’s.
2. Turn both of them on.
3. Select the Installation > Transfer Firmware > Transfer
Data to Other IRD menu.
NOTE All of preference settings are transferred together with
service information when transferring receiver data.
This means that you will lose all of your own data. So
You had better memorize some important data such
as video settings before starting transfer to avoid re-
setting them.