Topfield DV3 Digital Terrestrial Receiver Personal Video Recorder TF 6000 PVRt - Manual (Page 65)

9.1 Configuring the access point 57
3. Accessing the home page of the digital receiver.
Refer to § 9.3 for detailed descriptions about things you can
use on the web service of the digital receiver.
NOTE The web server and FTP server of the digital receiver
don’t work in standby mode. So it must be powered
up all the time if you wish to use the web service at
any time.
9.1 Configuring the access point
In this section, the setup program of WRT54G, which is an ac-
cess point manufactured by Linksys, will be refered to as an
exemplary description to help your understanding of how to
configure your access point for the digital receiver’s wireless
connection. For detailed descriptions of how to set up the ac-
cess point, refer to the manual of your access point.
9.1.1 To access the digital receiver indoors
Once your access point is powered up, whether it is connected
to the Internet or not, a local area network is created.
You can let the access point automat-
ically assign a dynamic IP address to
a computer or device connected to the
network by enabling the DHCP server
of the access point. In this case, you can
access the digital receiver if you know
the IP address which is assigned to the
digital receiver by the access point.
For how to verify the dynamic IP address assigned, refer to §
9.2.1.
If the digital receiver reboots, a new dynamic IP address will
be assigned to it. You have to assign a static IP address to