Toshiba D-RW2SU/D-RW2SC - Manual (Page 71)

71
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
Using [CH / ] or the Number buttons,
select the input of the unit which the external
equipment is connected. (L2 or L1)
• To use the input jacks on the back of this unit,
select “L1” position by pressing [0], [0], [1] with
the Number buttons on the remote control or the
[CH / ].
• To use the input jacks on the front of this unit,
select “L2” position by pressing [0], [0], [2] with
the Number buttons on the remote control or the
[CH / ].
5
Select a recording mode pressing
[REC MODE].
Refer to “Recording Mode” on page 65.
6
Press [REC I] on the unit to start recording.
7
Press “Play” on the external source to record
from.
8
Press [STOP C] on the front panel of the unit
to stop recording.
XP SP LP
EP SLP SEP
This operation may take a while
to be completed.