Tascam BB-1000CD - Manual (Page 53)

TASCAM BB-1000CD 53
14–Troubleshooting
If you experience any problems with the unit, please take a
moment to look through this chart and see if you can solve
the problem yourself before you call your dealer or a TEAC
service center.
No power
Check the connection to the AC power source. •
Check the polarity of the batteries. •
Remote control doesn't work.
Check the battery. Change it if exhausted. •
No sound
Disconnect headphones. •
Slide the • SPEAKER switch to ON .
Check the connection to the monitor system. •
Check the volume level. •
The sound to record hears distorted.
The setting of • FRONT MIC/EXT MIC knob or REAR
MIC/LINE knob is too high.
The input signal level is too high. •
The sound is noisy.
Check the connection of cables. •
Will not play a CD.
If the disc is dirty, clean the surface of the disc. •