Rolsen RL-37IT40 - Manual (Page 12)

Connection to
External equipment
12
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the RGB INPUT socket of the set.
Connect the audio cable from the PC to the AUDIO INPUT sock-
ets of the set.
Press the INPUT SELECT button to select PC-RGB .
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
RGB-DTV input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz,
720p-60Hz, 1080i-50Hz, 1080i-60Hz.
Note: When the set is inputted RGB-DTV signal in RGB-PC
mode, automatically it is set to RGB-DTV mode.
Connecting PC / DTV
DVI INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT
AUDIO AUDIO R L
RGB INPUT
7 7
- Send the set’s audio to external audio equip-
ment (stereo system) via the Digital Audio Output
(Optical)
Caution : Do not look into the optical output port.
Looking at the laser beam may damage your
vision.
How to connect
Connect one end of an optical cable to the TV
Digital Audio (Optical) Output port.
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equip-
ment.
Connecting Digital Audio
S-VIDEO S-VIDEO OPTICAL OPTICAL ANT ANT. IN AC INPUT AC INPUT
AV2 V2
8 8
< Back panel of the set >
< Back panel of the set >