4000000782_i450 instructions__pg28_en.pdf, W arning, C harness adjuster – The First Years VIA 1450 User Manual
Page 29

Section 7 - Installation and Use
5-
.
C Harness Adjuster
To loosen harness system
- The Harness Adjuster is located
at the Lower end of the Infant
Seat between the child’s feet.
Press the yellow center button
and pull the harness system
outward from the seat back
over the baby’s shoulder.
-
Harness System
W ARNING
•
Prevent injury. Always have child restrained
with harness system when child is in this Infant
Seat
6-
To Tighten Harness System
-
-
Lock Chest Clip and 5 Point
Buckle.
Pull Harness webbing out until
harness is snug over the child’s
shoulder.
28
Note: A snug strap should not
allow any slack. It lies in a
relatively straight line without
sagging. It does not press on
the child’s flesh or push the
child’s body into an unnatural
position.