Perreaux Prisma 350 - Manual (Page 34)

34
Power Consumption
Idle................................................................................................................... 80W
M aximum .................................................................................................... 1300W
(at 4Ω rated output)
Mains Input Voltage
100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz
(Set within the 350 at time of manufacture)
Dimensions
Width...............................................................................................430mm (16.9”)
Height ................................................................................................194mm (7.6”)
Depth...............................................................................................486mm (19.1”)
Fuse Ratings
M ains input fuse
100 – 125V: ..........................................................................2SB slow blow 15A
200 – 250V: ..........................................................................2SB slow blow 10A
(user serviceable)
Internal DC rail fuses ...................................................4 x 2AG normal blow 10A
( NOT user serviceable)
Weight
Net:..................................................................................................30.0kg (66.1lb)
Gross:...............................................................................................34.0kg (74.8lb)
Specifications
Explained
Rated Power Output (per cha nnel) ............................................ 350W
RMS
into 8Ω
The 350 has been designed around the industry standard 8Ω load. The 350
delivers a staggering 350W
RM S
continuously into 8Ω loads and 600W
RMS
into
4Ω loads. The 350 will also handle complex and 2Ω loads with stability and
ease.
Frequency Response .................................................... 5Hz to 40kHz ±0.25dB
This is the “standard” specification with which everyone is familiar. Actually,
“frequency response” is a misnomer: technically, it should be called “amplitude
response versus frequency” for it describes how uniform the amplitude or
strength of signals of various frequencies is maintained. It is generally thought
that a difference of 1db is the least that can be perceived by ear. To better that
by a wide margin, the 350 is specified four times higher, thus far exceeding the
audible range of the human ear.
Total Harmonic Distortion (THD+N) ........................... 0.004%, @ 1kHz into 8Ω
M easurements are made with fixed, purely resistive loads. However, since
speakers are not purely resistive, an amplifier’s distortion specifications do not
indicate what performance will be with the actual loads presented by speakers.
Perreaux distortion measurements hold for any conditions presented by any
known speaker. Further, any measurable distortion in the Perreaux is second-
order harmonics – the least offensive to the ear.