Perreaux Prisma 350 - Manual (Page 11)

11
3 3 3 3
Front Panel Functions
Power Indicator
The indicator light is an LED that shows the status of your 350 power amplifier.
Off
This indicates that the amplifier is either not connected to the mains supply, or
the unit is in standby.
The unit not being connected to the mains supply could be due to the power
switch at the rear of the unit being set to the OFF position, or power not being
supplied to the mains power cord (e.g. unplugged, switched OFF at the wall
socket, tripped circuit breaker, etc.).
Standby occurs when the unit is connected to the mains supply with the power
switch being set to ON and a master device, connected via the remote trigger
input at the rear of the unit, is set to OFF. To bring the unit out of standby the
master device needs to be set to ON.
For more information on the remote trigger, please refer to Chapter 4 “Rear
Panel Functions”.
Blue
When the LED is blue, the amplifier is ON and ready to be used.