TRENDnet TEW-624UB - Manual (Page 7)

2
UNPACKING AND SETUP
This section provides unpacking and setup information for the 300Mbps Wireless N
USB 2.0 Adapter.
Unpacking
The box should contain the following items:
‹
One TEW-624UB 300Mbps Wireless N USB 2.0 Adapter
‹
One Driver & Utility CD-ROM
‹
One Multi-Language Quick Installation Guide
‹
One USB extension cable
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
Before installation, check the following:
‹
Make sure your computer is running at least a 300MHz or above processor with
256MB RAM or above
‹
Make sure the USB ports are is USB 2.0 port
‹
The operating system on your computer must be the following: Windows 2000
(Service Pack 4), XP (Service Pack 2), Windows Vista
‹
A draft 802.11n or 802.11b/g access point.
‹
Make sure the environment has minimal interference and obstructions.
Connecting the USB Extension Cable
The USB extension cradle that comes with the Adapter has Type A connectors on
both ends. One end of the cradle is a male Type A connector that plugs into the
PC’s USB port. The other end of the cradle is a female Type A connector that
plugs into the Adapter.
This USB extension cradle can be adjusted to improve the wireless connection. It is
recommended that the 300Mbps Wireless N USB 2.0 Adapter is perpendicular to
the ground.