Toshiba SD-V57HTSU - Manual (Page 19)

19
PREP
ARA
TION
VCR Operation Setup (Continued)
Setting the Clock
The DVD/VCR Receiver gives you two ways to set the
time and date: the Auto Clock Feature or manually. The
Auto Clock feature enables the DVD/VCR Receiver to
set up the clock while the DVD/VCR Receiver is turned
off.
Auto Clock Set
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, the DVD/VCR Receiver looks for a channel carry-
ing XDS (Extended Data Services) information. XDS updates
the clock using the Coordinated Universal Time.
The Auto Clock feature enables the DVD/VCR Receiver
to set up the clock while the DVD/VCR Receiver is
turned off.
1. Press MENU and the MAIN menu will appear.
2. Use v v/V V to choose the CLOCK menu.
Press ENTER and the CLOCK menu will appear.
3. Use V V to choose the AUTO CLOCK SET option.
Use b b/B B to choose ON.
4. Use E E to choose the DAYLIGHT SAVINGS option.
Use F F or G G to choose AUTO, ON, or OFF.
If you choose AUTO, the DVD/VCR Receiver sets the
clock using the DST information broadcast in the signal
(channel). If you choose ON, the DVD/VCR Receiver
adjusts the clock for Daylight Saving Time automatically.
5. Use E E to choose the TIME ZONE option.
Use F F or G G to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
PACIFIC, ALASKA or HAWAII).
If “AUTO” is selected as the time zone, the DVD/VCR
Receiver sets the clock using the first Coordinated
Universal Time information it finds in a broadcast signal.
6. Press MENU when finished.
7. Turn off the DVD/VCR Receiver and the auto
clock set feature sets the time.
Note
There are cases where the TV station does not send or sends
the wrong time. Therefore, the incorrect time will be set. If this
happens we recommend that you set the clock manually.
Manual Clock Set
1. Press MENU and the MAIN menu will appear.
2. Use v v/V V to choose the CLOCK menu.
Press ENTER and the CLOCK menu will appear.
3. Use b b/B B to choose the month.
4. Use V V to choose the DAY option.
Use b b/B B to choose the date.
The day of the week will display automatically.
5. Use V V to choose the YEAR option.
Use b b/B B to choose the year.
6. Use V V to choose the TIME option.
Use b b/B B to choose the time.
Press and hold b/B to advance clock
continuously.
7. Use E E to choose the DAYLIGHT SAVINGS option.
Use F F or G G to choose AUTO, ON, or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
8. Press MENU when finished.
Note
If setting the clock manually, “AUTO CLOCK SET” must
set to “OFF”.
If set to “ON”, an incorrect date and/or time will be
entered again when the DVD/VCR Receiver is turned
off.
The clock uses the 12-hour system. (Be sure to set AM
and PM correctly.)
The initial Clock Setting is JANUARY 1, 2005, 12:00 AM.
Things to know before starting