Toshiba SD-V57HTSU - Manual (Page 17)

PREP
ARA
TION
17
VCR Operation Setup
On-Screen Display (OSD)
Set the Output Source to VCR as shown in “Selecting
the Input/Output Source” on page 15.
Some of these functions appear during VCR operated.
❶ ❷ ❸ ❹ ❺
❻ ❼
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
Indicates the current function.
❸ HI-FI DISPLAY
Indicates the unit is playing back tape recorded in Hi-Fi.
❹ CHANNEL DISPLAY
Indicates the selected channel (or LINE1(L1), LINE2(L2)).
❺ STEREO/SAP DISPLAY
(MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻ DATE DISPLAY
Shows the current date. (Month/Date/Day of the week
format)
❼ CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
Each press of the ENTER changes the TV
on-screen displays in the following sequence.
Notes
The function displays remain on the TV screen for 5
seconds.
The clock (or tape counter, tape remaining) mode will remain
on the screen until you press ENTER.
The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
EASY INFORMATION
If the Extended Data Service (XDS) signals are provided
along with normal TV signal in your area or during play-
back of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title, and program
details are shown on the TV screen.
When viewing a channel with Extended Data Service (XDS)
signals, press ENTER and the station ID will appear on the
TV screen. Press ENTER again and the program details will
appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the pro-
gram title and program details will appear on the TV
screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
On-Screen Menus Setup
The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) are accessed conveniently with
the on-screen menus, that lead you through each step.
The following pages describe the on-screen menu
selections available.
Menu Selection
Your VCR allows remote control adjustment of several
features.
1. Press MENU and the MAIN menu will appear.
2. Select the desired menu with v/V button and
then press ENTER.
Note
Menus remain on-screen for 3 minutes.
3. Press MENU when finished.
PLAY HI-FI CH 4
SP STEREO
OCT 8 , SAT 2:15 PM
REM 1:58
0:35:40
2:15 PM
STOP CH 4
SP STEREO
OCT 8 , SAT 2:15 PM
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
CH 4
SP WABC STEREO
“Home video”
OCT 8 , SAT
2:15 PM
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
CLOCK SET (page 19)
PROGRAM (page 25)
TUNING (page 18)
SETUP (page 18)
MAIN MENU