Vitek VT-1227 - Manual (Page 6)

6
ENGLISH
• Fill the water tank with water as described
in the corresponding section.
• Insert the power plug into the socket.
• Set the temperature control (9) to the
“MAX” position, the indicator (7) will light
up.
• Place the iron vertically.
• When the sole temperature (12) reaches
the desired temperature value, the (7) in-
dicator will go out, you can start ironing.
• Switch on constant steam supply, by
pressing the button (2) (steam supply
is on); steam will be outgoing from the
openings of the iron sole (12).
• After usage set the temperature control
(9) to the “MIN” position, switch off con-
stant steam supply by pressing the con-
stant steam supply button (2) (in the up-
per position of the button steam supply is
off).
• Take the plug out of the socket and wait
until the iron cools down completely.
• Open the lid (4) and pour out water from
the tank.
• Press the button (11) and lower the han-
dle (6) down.
ATTENTION!
If during the operation steam is not con-
stantly supplied, check whether the tem-
perature control (9) is set properly, check
the position of the button (2) and whether
there is water in the water tank (5).
CLEANING AND CARE
• Make sure that it is unplugged and has
cooled completely.
• Wipe the iron's outer surface with a damp
cloth and then wipe dry.
• Sediment on the iron sole can be re-
moved with a cloth soaked in vinegar-
water solution.
• After removing sediment, polish the sole
with a dry cloth.
• Do not use abrasive substances to clean
the sole and the body of the iron.
• Avoid touching the iron sole with sharp
metal objects.
STORAGE
• Turn the temperature control (9) anti-
clockwise to the “MIN” position, set the
constant steam supply button (12) to the
upper position (steam supply is off).
• Take the plug out of the socket.
• Set the iron vertically and allow it to cool
down completely.
• Open the water tank lid (4), turn over the
iron and drain any remaining water from
the water tank (5).
• Close the lid (4).
• Store the iron vertically in a cool dry place
out of reach of children.
Delivery set
1. Iron – 1 pc.
2. Water tank – 1 pc.
3. Traveling bag – 1 pc.
4. Instruction manual – 1 pc.
SPECIFICATIONS
Power supply: 120/240 V, ~ 50/60 Hz
Power consumption: 1000 W
Specifications subject to change without
prior notice.
Service life of appliance - 3 years
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom
the appliance was purchased. The bill of
sale or receipt must be produced when
making any claim under the terms of this
guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC
and to the Law Voltage Regulation
(73/23 EEC)
1227.indd 6 1227.indd 6 21.03.2011 12:51:36 21.03.2011 12:51:36