Remote control console 17, Mute level = -10db -10db dwn up back, Main level adjust mic spkr tx back – Telex C-2002 User Manual
Page 23: Main mic adjust desk hand aux back, Deskmic level 0db 0db dwn up back, Handset level 0db 0db dwn up back, Aux-in level: 0db 0db dwn up back, Min spkr level -60db -60db dwn up back, 2 main level settings, 1 microphones screen
Remote Control Console
17
7.3.1.3.1 Mute Button Level Screen
These parameters determine the level of Mute on a Per line bases.
PROG1 – Resets level setting to default of –10db.
PROG2 - Increments the level setting by 1db (maximum of –10db).
PROG3 - Decrements the level setting by 1db (minimum of -30sec).
PROG4 - Saves the current level setting and returns to the Mute Programming Screen.
7.3.2 Main Level Settings
PROG1 - Go to Microphones Screen.
PROG2 - Go to Speaker Level Screen.
PROG3 - Go to the Transmit Level Screen.
PROG4 - Return to Opening Menu.
7.3.2.1 Microphones Screen
PROG1 - Go to Desk microphone Preamp Gain Screen.
PROG2 - Go to Handset Preamp Gain Screen.
PROG3 - Go to the aux input levels screen.
PROG4 - Return to Main Level Settings screen.
7.3.2.1.1 Desk microphone Preamp Gain Screen
The current setting is shown in the upper right hand corner of the
screen. This setting is for the pre-amp level of the deskmic.
PROG1 - Resets level setting to default of +0dB.
PROG2 - Increments the level setting by 1 dB (maximum of +10dB).
PROG3 - Decrements the level setting by 1 dB (minimum of -10dB).
PROG4 - Saves the current level setting and returns to the Microphones screen.
7.3.2.1.2 Handset Preamp Gain Screen
PROG1 - Resets level setting to default of +0dB.
PROG2 - Increments the level setting by 1 dB (max of +10dB).
PROG3 - Decrements the level setting by 1 dB (min of -10dB).
PROG4 - Saves the current level setting and returns to the
Microphones
screen.
7.3.2.1.3 Aux Preamp Gain Screen
PROG1 - Resets level setting to default of +0dB.
PROG2 - Increments the level setting by 1 dB (max of +10dB).
PROG3 - Decrements the level setting by 1 dB (min of -10dB).
PROG4 - Saves the current level setting and returns to the
Microphones screen .
7.3.2.2 Speaker Level Setting
This setting is used to set the minimum volume level that an operator will be allowed to turn the speaker to.
PROG1 - Go to Microphones Screen.
PROG2 - Go to Speaker Level Screen.
PROG3 - Go to the Transmit Level Screen.
PROG4 - Return to Opening Menu .
7.3.2.2.1 Minimum Speaker Level
PROG1 - Resets level setting to default of -60dB.
PROG2 - Increments the level setting by 1 dB (maximum of 0dB).
Mute Level = -10dB
-10db dwn up back
PROG1
PROG2
PROG3
PROG4
Main level adjust
MIC SPKR TX back
PROG1
PROG2
PROG3
PROG4
Main Mic adjust
desk hand aux back
PROG1
PROG2
PROG3
PROG4
Deskmic level 0dB
0dB dwn up back
PROG1
PROG2
PROG3
PROG4
Handset level 0dB
0dB dwn up back
PROG1
PROG2
PROG3
PROG4
Aux-in level: 0dB
0dB dwn up back
PROG1
PROG2
PROG3
PROG4
Main level adjust
MIC SPKR TX back
PROG1
PROG2
PROG3
PROG4
Min Spkr level -60dB
-60dB dwn up back
PROG1
PROG2
PROG3
PROG4