Toshiba W-622 - Manual (Page 28)

28
MTS Broadcast Compatibility
This VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting the VCR to
your stereo system or stereo TV, you will experience the SAP or stereo sound.
Preparation
Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR.
Recording the SAP/Stereo Broadcast
1
On the SET UP screen (page 14),
select “SAP SET” using
PLAY or
STOP, and set to “ON” using REW
or
FF.
2
Press PROG. once to exit.
3 Perform a recording.
SAP (Second Audio Program broadcast):
A separate audio program, usually broadcast in a second language with the
main language.
Selecting a sound
Sounds recorded on the tape
According to your setting of “SAP SET” on the SET UP screen, the sound is recorded onto different
tracks of the tape as below. Set “SAP SET” to “ON” or “OFF” appropriately.
Hi-Fi sound track
Contents of recorded sound On-Screen Display
(Press
DISPLAY.)
Setting of “SAP SET”
on the SET UP
screen
Type of receiving
broadcast
Normal sound
track (Mono) L R “SAP” “STEREO”
“ON” or “OFF” not lit not lit MONO MONO MONO
“ON” or “OFF” not lit lit MONO (MIXED)
“ON” lit not lit MONO MONO SAP
“OFF” lit not lit MONO MONO MONO
“ON” lit lit MONO MONO SAP
“OFF” lit lit MONO (MIXED)
STEREO
STEREO
Regular
(monaural audio)
Stereo
Regular+SAP
Stereo+SAP
Note
When the TV is connected to the RF OUT terminal of the VCR, the output sound is monaural.
RECORDING
7 8
0 100
9
6 5
2 3
4
1
SLOW PAUSE/STILL
CANCEL
A.SELECT
EJECT
PROG. ENTER
TIMER
TV VOL
CH/TRK
REC SP/SLP
DISPLAY TV/VCR COUNT RESET REMAIN/ COUNTER
I.SELECT
POWER VCR TV
CURSOR
CM SKIP
STOP
PLAY
FF REW
1
A.SELECT
DISPLAY
2
Sounds in playback
You can play SAP and/or stereo broadcast with this VCR. Press A.SELECT to select a desired sound.
Desired sound L , R indicator in the On-Screen Display Sound Output
SAP Sound R (right) is on SAP
Stereo Sound Both R (right) and L (left) are on HIFI Sound
W-622 Eng (24-28) 2/28/02, 2:47 PM 28