How to decalcify your coffee maker, Important notice – Toastmaster ME8TPB User Manual
Page 10
10
How To Decalcify
Your Coffee Maker
1. Place a paper filter into the removable filter basket. Make sure
the removable filter basket fits securely so Lid closes properly
(Lid will snap into place).
2. Fill carafe with one part white vinegar to three parts cold water.
Pour the water and vinegar solution into the water reservoir.
3. Place the empty thermal carafe on the base plate. Plug the
Coffee Maker into an outlet and switch the Coffee Maker ON.
4. Keep the Coffee Maker ON until the thermal carafe is half full.
Switch the Coffee Maker OFF and let cool for 1/2 hour.
5. After 1/2 hour, pour the water and vinegar solution back into the
Coffee Maker.
6. Place the empty thermal carafe on the base plate. Switch the
Coffee Maker ON and let all the water and vinegar solution flow
through.
7. Discard the solution and the paper filter.
8. After allowing the Coffee Maker to cool for 15 minutes, flush out
all the traces of vinegar by pouring a carafe full of cold water into
the water reservoir. Make sure to insert a fresh filter into the
filter basket before brewing and place the empty thermal carafe
on the base plate. Switch the Coffee Maker ON and allow it to
cycle through.
9. At the end of the brew cycle, switch the Coffee Maker OFF.
Discard water in the thermal carafe. Repeat steps 8 - 9. Unplug
the Coffee Maker when finished.
IMPORTANT NOTICE
If any parts are missing or defective,
DO NOT return this product.
Please call our Customer Service Department for assistance.
800-233-9054
Monday - Friday 9:00 am - 5:00 pm CST
Thank You
ME8TPB,PW,PBS,SW,SB,PWCAN_IB_Cr 12/1/04 1:49 PM Page 10