TOA Electronics P-9060DH - Manual (Page 10)

10
8.3. Removable Terminal Plug Connection
Be sure to use the supplied removable terminal plugs for connections to the removable terminal blocks.
Cautions
• Be sure to use shielded cables for audio signal lines.
• Avoid soldering stranded or shielded cable, as contact resistance may increase when the cable is tightened
and the solder is crushed, possibly resulting in an excessive rise in joint temperatures.
• Use cables of AWG 12 – 24.
Solid or stranded cable Shielded cable
7 mm
(0.28”)
7 mm
(0.28”)
20 mm
(0.79”)
[Cable end treatment]
[Connector connections]
Step 1. Loosen the terminal screw, then insert the cable.
Step 2. Retighten the terminal screw. (Pull on the cable to ensure it is securely connected.)
Tip
Recommended slotted screwdriver type: Screwdriver with 3 mm (0.12") blade width
Tightens Loosens
Terminal screw
Slotted screwdriver
Shielded cable
Removable terminal plug (accessory)
1
1 2
Hot
Cold
Earth
Bit shape 3 mm (0.12”)