TOA Electronics CPEI 25150 - Manual (Page 9)

Section 2: Installation and Setup 6
Initial Configuration
Before You Begin Configuration
Some settings on your computer must be verified or changed to ensure that your computer configuration can
support the CPEi 25150 desktop modem.
ⅷ Call Sprint to confirm that your modem is activated.
ⅷ Verify that the IP address and DNS settings are automatically generated in your Local Area connection of
your Internet Protocol (TCP/IP) properties. Refer to the chapter titled “Configuring TCP/IP” for information on
how to do this.
ⅷ Ensure you know which protocol you will need to enter in the Setup Wizard procedure. This will either be
EAP-TLS or EAP-TTLS. If EAP-TTLS is to be used, Sprint will provide you a Username and Password.
User Interface Overview
A Web-based Graphical User Interface (GUI) is used to configure the features of your modem. The top portion
of the window displays buttons for the six main menus available in the interface:
Personalize , Internet , Status ,
Port Forwarding , Local Address , and Control Panel . Each active menu contains varying tabs to control specific
features. In the example below, the Personalize menu contains tabs for Password (shown), Device Time ,
Device Name , and Restore Factory Settings .
Figure 5: Main Menu Sample