Toshiba HD-S23 User Manual
Page 18
INSTALLATION
On the main menu, select “INSTALLATION” and key-in your password to enter the Installation page.
Note: The default password is 0000. Please refer to pp. XX to change the password.
AUTO SCAN
The steps required to automatically program the receiver are outlined as below:
● Highlight “AUTO SCAN” and press the
“ENTER”
button to start channel search.
● The receiver starts scanning from channel 2
to
channel 69. The status bar shows the progress
being made.
● Once the digital TV signal is scanned, the channel
number and program name will be shown.
NOTE: Auto scan process may take about 18 minutes to
complete.
QUICK SCAN
If you live in one of the cities listed on the Quick Scan menu, you may select your city and start scanning all
predefined digital TV channel signals..
● On the installation page, highlight “QUICK SCAN”
and press the “ENTER” button.
● Use the “
▲
” and “
▼
” buttons to highlight the city
you live in and press the “ENTER” button to start
scanning.
● For Australia, it will scan through five RF channels
including “Seven”, “Nine”, “Ten”, “ABC and “SBS”.
Note: The frequencies of these five channels are
preset in the receiver’s database. In the case
that the channel frequency is changed by the
local TV station or a new channel comes up
after July 2003 you have to scan these
channels using “MANUAL SETUP”.
18