Technicolor - Thomson 20LB020S4 - Manual (Page 23)

Operation
23
En
Use arrow buttons Ÿ / ⁄ to select the individual menu items.
Use arrow buttons / ÿ to modify the relevant data.
In the Program line, enter the number of the channel to which
the favourite pages will be allocated. Name displays the relevant
television station abbreviation automatically.
Enter the desired page numbers in the lines TXT-page 1 to
TXT-page 4 as follows:
• Select one of the TXT-page... lines.
• Press arrow button / ÿ, the page number is displayed in
red.
• Enter the desired 3-digit page number using numeric but-
tons (0-9). The page number returns to green.
• Select the next TXT-page... line, and so on.
Press the OK button to store the settings. Press the EXIT button
to quit the menu.
If the relevant function buttons F1-F2-F3-F4 are pressed during
normal television operation, the teletext page assigned appears on
the screen immediately. To exit teletext, press the EXIT button.
TOP / FLOF teletext
If the television detects TOP or FLOF Teletext, the TOP/FLOF
information is displayed in the last line.
Pressing the coloured buttons selects these pages directly.
red button
(–) scroll down one page
green button (+) scroll forward one page
yellow button next section
blue button next topic
If, for example, Current is displayed in the yellow column of the
TOP/ FLOF line, you can call up this page by pressing the yel-
low button.
By pressing the MENU button once, the standard line –, +, P 100
and Mix is displayed in colour instead of the TOP/FLOF line.
Pressing the respective colour button carries out the relevant
function.
red button
(–) scroll down one page
green button (+) scroll forward one page
yellow button (P100) the table of contents on Teletext
page 100 is automatically displayed.
blue button (Mix) the television image is faded into the
Teletext page. Press the button again to dis-
play the normal text page.
Note:
In standard text, if no TOP or FLOF is detected, the
standard line is displayed instead of the TOP/FLOF line.
Multiple pages
Multiple pages run under a page number, however, consist of
several subpages which are automatically activated one after the
other. They may be displayed, for example, in the following way:
Opening subpages:
For a single displayed videotext page, approximately 4 subpages
are stored in the memory. If these are already in the videotext
memory, you can open them as follows:
•
Press up arrow button Ÿ to activate the subpage function.
• Open the desired subpage in ascending or descending order
using red button or green button or
• enter the desired page directly as a 4-digit number using the
numeric buttons (0-9).
Each subpage will appear on screen as selected. Press the down
arrow button ⁄ to deactivate the subpage function.
En