Test-Um VALIDATOR-NT NT955 - Manual (Page 58)

57
Test-Um NT955 Series
Test Results
Untitled1.job Test-Um Inc.
validator
A
B
C
D
BERT Results:
Split
188ft
186ft
--
--
--
--
Length
Max: 300ft
Skew
Max: 35ns
SNR
Min:20db
BACKSPC PG UP PG DOWN
--
--
--
--
Split
100%
2005 Aug 25
10:53:01
Figure 4.6 Test Results-Split
Auto Find Feature: It is necessary to connect the Validator-NT remote
unit to the other end of the cable to measure for both Speed and
Performance. If the remote is not plugged in a message will appear
“Remote not found. Alternating between Tone and Test.” We call this
“Auto Find” and it is a feature that let’s you start the test and then go to
the other end where the remote should be plugged in. If the end of the
cable being tested is not known Validator-NT helps by generating tone
on the line so that a tone probe can be used to locate the far end of the
cable. Auto Find will terminate when the remote is plugged in.
Test Results
Untitled1.job Test-Um Inc.
validator
Alternating Tone and Test.
REMOTE NOT FOUND
Cable001
100%
2005 Aug 25
10:53:01
Figure 4.7 Cable Test without Remote
Validator TM How AutoTest Works