Thermador CIT304GM - Manual (Page 23)

24
Accessing the basic
settings
Follow the steps below:
1. Switch on the cooktop using the main switch
2. Press the PANEL LOCK symbol within the next 10 seconds until you hear a
sound signal and o b lights up on the display (see illustration).
3. Press the PANEL LOCK symbol until the indicator for the required function is
displayed.
4. Then select the required setting using the programming zone. This new setting
will be shown in the element display on the upper right-hand side.
5.
Press the PANEL LOCK symbol again for more than 4 seconds, until you hear
a sound signal. The settings have been correctly stored.
Selecting the required
setting