Topcom Butler E400 - Manual (Page 37)

English
15
Base settings
7.2 Choosing the ring melody
The base and each handset can ring with a different melody. To set the base melody:
7.3 Changing the PIN code
Certain functions are only available to users who know the PIN code.
By default the PIN code is 0000. To change the PIN code:
7.4 Setting the dialing mode
There are two types of dialing mode: DTMF/Tone dialing (most common) and pulse dialing (for
older installations).
To change the dialing mode:
7.5 Flash time duration
Press the flash key ‘R’ (key 7 - picture 2D Handset) to use certain services on your external line
such as “call waiting” (if your phone company offers this feature); or to transfer calls if you use a
telephone exchange (PABX). The Flash key ‘R’ is a brief interruption of the line. You can set the
flash time to 100ms or 250ms.
1 Enter the menu
2 Select “SETUP” and confirm.
3 Select “BASE MELODY” and confirm.
4 Select a melody (1 to 5).
5 Confirm or return to the previous menu.
1 Enter the menu
2 Select “SETUP” and confirm.
3 Select “PIN CODE” and confirm.
4 Enter the old 4 figure PIN code and confirm.
5 Enter a new 4 figure PIN code and confirm.
6 Enter the new PIN code a second time and confirm.
1 Enter the menu
2 Select “SETUP” and confirm.
3 Select “DIAL MODE” and confirm.
4 Select the dialing mode and confirm.
1 Enter the menu
2 Select “SETUP” and confirm.
3 Select “RECALL” and confirm.
4 Choose “RECALL1” for short flash time (100ms) or “RECALL2” for long
flash time (250ms) and confirm.
4 GHI 6 MNO 5 JKL
4 GHI 6 MNO 5 JKL
4 GHI 6 MNO 5 JKL