Toshiba Camileo X100 - Manual (Page 25)

25 Record Mode
Using the pre-record function
Using the pre-record function
The Pre-record function ensures that you will not miss any critical
recording opportunities, as movies are recorded 3 seconds before
the OK button is pressed.
To use the Pre-record function:
1 Press the Pre-record button ( ) while in Record mode. The
Pre-record icon( ) appears on the LCD touch screen.
2 Aim the camcorder at the subject.
3 Press the OK button to start recording. (The camcorder records
3 seconds before you actually press the OK button.)
To use the function again, repeat steps 1-3 above.
The Time Lapse function cannot be used when the Pre-Record
function is activated.
Picture recording
In Picture Record mode (The Picture Record LED indicator is lit),
press the OK button to take a picture.
Press Playback button to view the picture.
The three resolution settings available are:
Using the Flash or digital light function
The camcorder has three Flash settings and one additional setting
that allows you to increase the brightness of an object, which may
be dark or in shadow.
To use light function:
1 Flash Auto ( ): The flash fires automatically according to
light conditions. Use this mode for general photography,
(Picture Recording only).
2 Red Eye Reduction ( ): The pre-flash will fire to reduce the
red-eye effect, (Picture Recording only).
Image Quality
High Quality: 16 Mega Pixels
Standard Quality: 5 Mega Pixels
Low Quality: 3 Mega Pixels
NOTE