Telex STRATUS 50-D - Manual (Page 5)

Page 3
Headset Operation
1. Connect the headset as shown in Figure 4. Set the MONO/STEREO
headphone switch to match the type of sound system in your aircraft.
If the headset is set for stereo and the intercom is set for mono, sound
will only come out of one earcup.
2. Rotate the entire boom overhead to wear the microphone on either
the right or left side of the head (See Figure 5).
3. Reshape the boom so that the microphone will be in front of
the mouth.
4. For best noise cancellation, position the microphone as close to the
mouth as possible and speak in a normal voice (Figure 7).
5. For mic replacement, press the release catch and carefully pull out
the mic element. Avoid pulling the connecting wires (Figure 6).
Figure 6
Mic Element Removal
Figure 4
Headset Connections
Figure 5
Microphone Placement
Figure 7
Mic Placement