Teac T-R670AM - Manual (Page 16)

Radio Reception (1)
16
ENGLISH
1 Select the AM or the FM band by pressing the corres-
ponding button.
2 If the PRESET indicator is lit in the display, turn it off by
pressing the TUNING MODE button.
3 Select the station you want to listen to (auto selection).
Hold down the TUNING button for 0.5 to 2 seconds.
When a station is tuned in, the tuning process will stop
automatically.
Press the TUNING button to stop the auto selection.
< Selecting stations which cannot be tuned automatically
(manual selection)
Press the TUNING button repeatedly or hold down it, and
release it when the station you want to listen to is found.
When the TUNING button (‡/°) is pressed momentarily
(0.5 second or less), the frequency changes by a fixed step
(see STEPS below).
FM : 100 kHz steps
AM : 10 kHz steps
< "STEREO" is displayed when a stereo broadcast is tuned in.
< "TUNED" is displayed when a broadcast is correctly tuned in.
1
2
3