Teledyne 10 - Manual (Page 68)

BioOptix™ 10
Appendix B Fluid Path Diagrams
B-4
B.4 Pump Flush A Pump Flush should be done whenever the system will be idle
for more than a few hours. (See sections 3.8 and 4.1.) The flush
removes salts from the Buffer in lines to the Mode knob (Figure
B-6).
Figure B-6 Pump flush
B.5 Plumbing Diagram A complete plumbing diagram can be found on the following
page.
Buffer
Sample
Channel
Mode
Pump
Buffer A Buffer B
To Pump Purge