Toshiba 32JW8UA - Manual (Page 30)

30
INTRODUCTION
GETTING ST
AR
TED
USING THE TV'S
FEA
TURES
EQUIPMENT
CONNECTIONS
REFERENCE
VIEWING
TELETEXT
Toshiba 32JW8UA (E)
(MONITOR)
VIDEO
AUDIO
RGB/PC
R L
AUDIO
outputs
Conversion
adapter
(if necessary)
To connect a computer
When connecting computer equipment to the TV:
• An analog RGB (15pin) computer cable can be connected.
Computer
Connect a PC cable from the computer to the RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: VESA 640
× 480 @ 60 Hz
• SVGA: VESA 800 × 600 @ 60 Hz
• XGA: VESA 1024 × 768 @ 60 Hz
However, these RGB signal formats are converted to match the particular scanning system of the TV. Therefore, the TV
may not display small text properly.
Notes:
• For the VESA 800
× 600 @ 60 Hz and VESA 1024 × 768 @ 60 Hz signals, the line flicker may appear on the screen.
• The color blur on the picture may occur according to input signals.
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15pin terminal.
• A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured
depending on some signals. This is not a malfunction.
• Depending on the specification of the PC you are playing the DVD VIDEO on, and the DVD’s title, some scenes may be
skipped, or you may not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15pin connector
Back of TV Mini
D-sub
15pin
RGB/PC
output
Pin assignment for RGB/PC terminal
Pin No. Signal name Pin No. Signal name
1 R 9 NC
2 G 10 Ground
3 B 11 NC
4 NC (not connected) 12 NC
5 NC 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
11 15
6 10
1 5
Audio cable
RGB PC cable
EQUIPMENT CONNECTIONS
External Equipment
Connections
(continued)
#32JW8UA_28-30.p65 04.10.25, 10:28 AM 30
Black