Telex TR-300 - Manual (Page 34)

BC-300NM2 BATTERY CHARGER
NOTE: The BC-300NM2 is not supplied with
the TR-300. See “Accessory” Section for or-
dering information.
Remove the battery holder from the TR-300.
CAUTION
DO NOT ATTEMPT TO CHARGE
ANY ALKALINE BATTERIES WITH
THIS CHARGER.
Snap the terminal connector onto the battery
holder and plug the charger into a 110 Volt
outlet.
Full charge of the battery pack is obtained af-
ter 12 to 14 hours. A full charge will last 15
-17 hours with nickel-metal hydride batteries.
Extensive over-charging may damage or de-
stroy the batteries. Please ensure the charging
time does not exceed 24 hours.
Unplug the charger when not in use.
Figure 38
BC-300NM2 Battery Charger
-32-