Telex TR-300 - Manual (Page 18)

ANTENNA INFORMATION
ANTENNA CONNECTIONS
The BTR-300 is supplied with two (2) anten-
nas. One 5/8-wave antenna for Transmit and
one 5/8-wave antenna for Transmit and one
5/8-wave for Receive.
Assemble the 5/8-wave antenna by screwing
the two sections together as shown in Figure
10. Both sections of the BTR-300 5/8-wave an-
tennas must be used. Leaving off the top sec-
tion will result in reduced range.
Figure 10
5/8-wave Antenna Assembly
To insure that the frequency of the antennas
match the receiver and transmitter of the
BTR-300, match the color dot on the antenna
with the color dot on the BTR-300
Attach the antennas to the antenna input re-
ceptacles unless the BTR is rack mounted.
Tighten the connector securely.
Figure 11
Attaching 5/8-wave Antenna
-16-
DO DON’T
COLOR DOTS