Toshiba SD 3755 - Manual (Page 40)

PAGE 40 INITIAL SETTINGS
Each DVD disc has a variety of audio output
options. Set the player’s Digital Audio Output
according to the type of audio system you use. At the SETUP screen, press D D / E E to select
Digital Audio Output and press G G .
Press D D / E E to select the desired output and
press ENTER.
You can select Digital Audio Output or Sampling
Frequency item by pressing ENTER.
■ Digital Audio Output
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if
an active digital output is supplied to a Dolby Digital decoder,
(or an amplifier or other equipment with Dolby Digital
decoder).
Stream/PCM: Select “Stream/PCM” if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder and
MPEG decoder.
PCM: Select “PCM” if an active digital output is
supplied to an amplifier or other equipment with linear PCM
only (or MD recorder or DAT deck).
■ Sampling Frequency
To change the Sample Frequency setting, first select the
desired digital audio output type as indicated above.
If your A/V receiver or surround processor is NOT capable of
handling 96kHz signals, select the 48kHz option. When this
choice is made, this unit will automatically convert any 96kHz
signals to a 48kHz output so that your system is capable of
decoding them.
If your A/V receiver or surround processor is capable of
handling 96kHz signals, select the 96kHz option. When this
choice is made, this unit will pass each type of signal through
without any further processing.
2
1
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz
Notes
❍ When you are not using the player’s digital audio output, don’t
select any of the options.
❍ If an active digital audio output signal is supplied to a receiver or
other equipment without a corresponding digital decoding capa-
bility, a very loud noise may be produced which could
permanently damage the speakers.
❍ The DTS DVD disc sound is played back only when the DVD
player is connected to a receiver with a DTS decoder.
Selecting Digital Audio Output
Playback
Disc
96 kHz
Linear PCM
DVD
DTS DVD
Dolby Digital
DVD
MPEG DVD
Audio CD/
Video CD
DTS Audio CD
Stream/PCM
PCM
DTS bit Stream
Dolby Digital
bit Stream
MPEG bit Stream
PCM
DTS bit Stream
OUTPUT
Dolby Digital/
PCM
PCM
DTS bit Stream
Dolby Digital
bit Stream
PCM
PCM
DTS bit Stream
PCM only
PCM
DTS bit Stream
PCM
PCM
PCM
DTS bit Stream
1, 2
2