Tanita BF-562 - Manual (Page 3)

GB GB
Remarks
Using the Bracket for Wall Installation
The display box can be used with the attached bracket for wall installation.
The display box can also be used horizontally(eg on tables).
*Please note: If you measure yourself while holding the display box in your hand, this weight(about 500 g) will be added
to your body weight.
ቢDeciding on the position of the bracket for wall installation
Ensure the bracket is no higher than 1.7 m from the floor.
Do not use the equipment if the connection cable is tightly stretched or
part of the platform is unsupported, as this may cause malfunction.
ባAttaching the bracket for wall installation
Firmly screw the bracket to the wall by inserting the screws (x 2)
through the holes in the bracket using a cross head screwdriver.
ቤAttaching the display box
Hang the battery box cover on the back of the display box, insert the
hooks of the large bracket into the holes on the bottom to attach the
display box.
aAlways use the attached screws to attach the bracket for wall
installation
If you attach the bracket with double-sided sticking tape, for example, it may fall down.
aEnsure that the display box is firmly hooked on the bracket for wall
installation
If the display box is not hung on both hooks, it may fall down or become unstable.
Preparation
Use
7
GB GB
ȞInstruction Manual (This Manual)
ȞOperating Chart
ȞWarranty
ȞBracket for Wall Installation
Parts/Accessories
ȞDry Cell Batteries (AA x 4)
(R6P)
ȞScrew (x 2)
ȞCarpet Feet (x 4)
Connection Cable
Heel Electrode
Front
Electrode
Display Box
Scale Platform
Scale Platform
Underside
6
Personal Memory Key (5 users)
Battery Box Cover
(on the Bottom)
Weight Only / OFF Button LCD Display
GRAPH Button
Time / DOWN
Button
UP Button
SET Button
aCheck the Accessories!
Remove when you need to use them.
Holes for Carpet Feet (Four in Total)
BF-562海外GB+D面付解除 ページ7