Toshiba SD-3800 - Manual (Page 44)

47
Quic
k contr
ol
Selecting the Playback Function - QUICK -
Pressing one button can display a list of playback functions which are relevant to
your current playback mode. You can check and modify them from the list.
During playback, press QUICK.
The following on-screen display
appears.
(The actual display will vary
depending on the playback status.)
e.g.
Press / to select a desired item.
e.g. To change the repeat mode:
Press ENTER.
e.g. The mode menu appears.
Press / to change the setting.
e.g. To select the title repeat
mode:
1
2
3
Quick menu
Memory : To program memory playback. 36
Repeat : To select the repeat playback mode.
For the mode selections, see page
35 .
A-B (Set A) : At the beginning of a segment you want
to repeat, press the ENTER button. Then
at the end of the segment, press the
ENTER button again. The segment is
played repeatedly.
35
Random : To select the random playback mode.
For the mode selections, see page
37 .
Bit Rate : To activate the bitrate display.
(Bit rate: data transfer rate (Mbit/s)
Refers to the amount of picture, sound
and subtitle data in the DVD video disc
transferred per second.
The larger the value, the more data
processed, but this does not necessarily
insure better picture quality.)
Text : To activate the Text display.
Text display:
Displays DVD-Text data or CD-Text data
if included on the disc.
(Some content on the disc may not be
displayed properly depending on the
disc.)
Exit : To quit the on-screen display.
Note
Pressing the QUICK button again also exits the on-screen
display.
DVD-V
CD
VCD Selecting the playback function
QU
ICK
DVD-V
ENTER
ENTER
Memory
Quick
A–B (Set A)
Repeat Repeat
Random
Bit Rate
Text
Exit
ENTER Memory
Quick
A–B (Set A)
Repeat Repeat
Random
Bit Rate
Text
Exit
ENTER
Chapter Repeat
Title Repeat
All Repeat
Repeat Off
4
Chapter Repeat
Title Repeat
All Repeat
Repeat Off
1
2 - 5
5 Press ENTER.
The on-screen display disappears
and playback will resume according
to your selection.